Speaking of the sole cleaner in the entrance cleaner system, it can be said that different people have different opinions. There are many kinds of sole cleaners on the market. After years of precipitation, imitation products have sprung up like bamboo shoots, which makes the consumer's scalp numb and wonder how to choose stability. Strong durable shoe sole brush machine! Well-known brand Herui sole cleaner ranks first in the sole cleaner industry. Why choose Herui HORROL
HRSC series sole cleaner? Where is the difference advantage?
The HRSC series fully automatic sole washer of the HORROL brand is mainly composed of sheet metal body, motor, water pump, brush, controller, radar sensor, water level sensor, filter plate, absorbent pad, etc. The sole is washed by soaking the belt brush and the wool strip in the water-filled box with sufficient water. Then the sole can be cleaned by walking over the brush strip or the belt brush. The absorbent cotton absorbs the excess moisture of the sole and achieves the effect of dust-free and dry. HORROL HRSC series water-washable sole cleaner is fully automated with water intake and drainage, automatic induction, human walking stop. It can remove 99% of the sole dirt without staying on the equipment plane. It can clean the sole dirt at the entrance, strangle the dust-free dust at the entrance, and make the production environment and office environment clean and comfortable, so as to achieve the key of environmental cleanliness. Please.
HRSC series water-washed sole cleaner is simple in structure, super-thin without occupying space, cleaner, easy to install, use and maintain. No need to occupy labor, only occasional basic maintenance can make sole washing machine continuously create value for enterprises and save labor. At the same time, sole cleaner can replace non-recyclable products such as sticky dust mat, and make great contribution to environmental protection.
Fully automatic sole cleaner is not only suitable for families, but also for offices, laboratories, laboratories, computer rooms, television stations, hotels, movie studios, etc. In addition, sole cleaner is also suitable for hospitals, food factories, pharmaceutical factories, breeding factories and other special places. This product is reasonable in design, beautiful in appearance, advanced in technology and convenient in use, which will bring cleanliness and convenience to millions of households. Through shoe sole cleaning machine, the requirement of dust reduction is achieved.
What are the industries applicable to shoe sole cleaning machines? Fully automatic sole cleaner is suitable for all kinds of industries with high environmental requirements, such as aerospace, high-speed railway, electronics, machinery, hardware, food, manufacturing, mobile phone, aquaculture, automation, exhibition hall, laboratory research and development, semiconductor production. Medical industry, purification system, especially dust-free workshop, now almost all dust-free workshop need sole cleaner, dust-free workshop sole cleaner has become an indispensable entrance cleaning equipment for enterprises with dust-free room.
Talking about Herui sole cleaner, we first need to understand its many years of history. The Herui HORROL sole cleaner of Dongguan Herui Electronic Technology Co., Ltd. started in 2009 and applied for the earliest patent of sole cleaner in 2011. So far, the sole cleaner developed and manufactured by Dongguan Herui Electronic Technology Co., Ltd. has been updated. The seventh generation of the latest fully automatic intelligent sole cleaner, many years of technical research and development, technological updates, product stability precipitation, thoughtful after-sales service, only today's HoRROL brand sole cleaner ranks first among the top ten brands in the sole cleaner industry, wins the trust of customers, and is well known in major enterprises. Customers such as Jeep Group, Flextronics, Foxconn, Samsung, China Lithium New Materials, Huaxin Cement and other well-known enterprises at home and abroad.
Secondly, it talks about the integrated block control system of HERUI HORROL sole cleaner, which is different from other imitation brands in the market. The seventh generation of HERUI intelligent sole cleaner integrates hand-in-hand water injection and drainage system, high and low water level protection system, working time control system, sewage and water exchange system, overload protection and other functions into one module. The integrated control of the small box is realized. Integration module, strong stability, high control precision and efficiency, simple operation and easy maintenance, this is an integrated operation control system that no other manufacturer can achieve.
HORROL HRSC Series Water Exchange: The equipment can set up automatic water intake, while the drainage needs to be connected to the drainage pipe, so as to achieve the purpose of automatic drainage. There are three protection devices for automatic water change: water protection, water level protection and high water level protection. Avoid worrying about the problems such as no water idling, full overflow, automatic drainage and replenishment. Under the condition of using water, the equipment can set the drainage time interval (adjustable) to change water according to the different needs of customers. Work for 0-60 minutes, change the water for 2 minutes each time.
Water level switch fault protection: When it is detected that the high level switch is closed and the low level switch is off, the controller immediately closes all loads. The microwave water level sensor with high reliability is used to trigger the protection of high and low water level three times, and the alarm of high and low water level for 1, 2 and 3 minutes is automatically closed. Manual button can enter manual mode, while the whole machine stops working, press drainage switch again to restore, or automatically restore to normal after 90 seconds.
Water overtime protection: If the low water level switch can't be closed by continuously adding water to the set time, the malfunction will be reported (motor and pump are forbidden to operate), but the solenoid valve will continue to open.Once the water supply is normal, it will resume normal operation. Adopt high reliability microwave water level sensor to protect high and low water level by 3 trigger, 1,2In 3 minutes, the water level is too high or insufficient to alarm and stop automatically.
Water pump: setting time automatically after each set time. (This function can be disabled or enabled by pressing the button on the board for 5 seconds to switch. After the switch is successful, the green light status changes. Flashing means disabled, constant light means enabled, and automatic timing pumping is prohibited after the switch is disabled).
Functional description of sole shoe cleaning machine:
According to customer cleaning requirements, the cleaning time of sole cleaner can be adjusted: 1-60 seconds, non-standard setting.
According to the different needs of customers, the sewage discharge time can be adjusted: 1-60 minutes can be adjusted, and each sewage discharge time is 2 minutes (to avoid the accumulation of sediment in the storage tank of the clean area of non-clean equipment, resulting in poor cleaning effect of equipment).
Water intake instructions: 24V pulse solenoid valve (long life, stable performance, three continuous triggers using microwave water level sensor, no electricity and no water intake (to avoid sudden power outage when water intake, resulting in equipment overflow).
Water-free shutdown function: This machine uses 1, 2, 3 minutes to reach the water level, automatic alarm shutdown (to prevent water-free work, can not reach the cleaning effect and equipment life reduction and other damage).
Keynote: 1, 2 and 3 buttons can be adjusted according to the difference of the customer's water pressure. Button 1: one minute water level is less than automatic alarm stop; Button 2: two minutes water level is less than automatic alarm stop; Button 3: three minutes water level is less than automatic alarm stop.
Manual Function Description: Customers can unconditionally install water intake and sewage pipes. Manual water and sewage functions can be used, and switch by pressing key 6 manually.
Long press 4 button can cancel all alarm protection functions.
Herui sole cleaner will not smell when used for a long time. The sewage discharge of HORROL sole cleaner is to adjust the drainage and water exchange time according to the size of human flow. It uses grid support, landslide rapids to drain water. There is no residue at the bottom of the sewage pool. There will be no foul water accumulation and odor when used for a long time. This is a cleaner in many markets. Not available.
HRSC Series sole cleaner fur belt is vulcanized into one, no joints, brush length up to 8-10MM, cleaner no dead angle more thorough, long-time friction sole will not damage big, use longer, cracking, durable.
The seventh generation of China core sole cleaner, a new upgrade of China core, independent research and development of core technology, radar induction intelligent control, wise home no diving, no dead angle, three seconds of extremely fast cleaning, for you to save every second, out of the mud without dyeing, Lianqing but not demon, simple installation and maintenance, super clean and durable! uuuuuuuuu
The HRSC series of the 7th generation HORROL brand of Herui Group are fully automatic intelligent sole cleaners, automatic induction sole cleaners and automatic sole washers. They are suitable for all kinds of places needing cleaning. They are fully automatic water injection and drainage without splashing. They have the advantages of low power consumption, good cleaning effect, convenient installation and use, convenient use and maintenance in the later period. Walking is clean. Independent research and development of sole cleaner, so that the environment is cleaner, sole cleaner for enterprises to create more value, so that the enterprise environment high-end atmospheric grade.